Cutting Disc Primary Quality Cut Off Wheel Cutting Disc

•Apple Abrasives

•aluminum alloy

•115x1.2x22.2mm

•Max. RPM 13300

•used for steel,metal and stainless steel 

•custom requirements supported

Color:

black/OEM

Packing Details:

200 pcs/ctn

Industrial Application:

Cutting stainless steel, titanium alloy, ordinary steel, sticky metal, high carbon steel, non-metal, etc

Usage Instructions

Select the Appropriate Product: Based on the material, hardness, processing requirements of the object to be ground, as well as the working - scenario factors, choose the flap disc or flap wheel with the appropriate grit size, hardness, and dimensions. For example, for harder metal materials, a product with a coarser grit size and greater hardness should be selected; for fine - grinding scenarios, a product with a finer grit size is required.

Installation and Fixing: Flap discs and flap wheels usually need to be installed on power tools such as angle - grinders for use. During installation, ensure that the product is firmly and reliably connected to the tool to avoid loosening or falling off during use. Follow the usage instructions of the tool and the grinding product for correct installation, using suitable nuts, washers, and other accessories.

Operation Posture and Force: 

When using, maintain a correct operating posture, stand firmly, hold the power tool steadily, and keep the flap disc or flap wheel at an appropriate angle to the grinding surface, generally 15° - 30°. When starting to grind, control the force. Gently touch the grinding surface first, and then gradually increase the pressure. Avoid applying excessive pressure at the beginning to prevent uneven grinding or damage to the grinding product and the workpiece surface.

Movement Method: During operation, move the flap disc or flap wheel evenly along the grinding surface to avoid local over - grinding. You can use linear - movement, circular - movement, or cross - movement methods. Select the appropriate movement method according to the shape and size of the grinding surface to ensure a uniform grinding effect.

Cooling and Cleaning: 

During the grinding process, heat is generated due to friction, which may cause the grinding surface to overheat, affecting the processing quality and even damaging the workpiece. Therefore, for some temperature - sensitive materials or during long - time grinding, appropriate cooling measures should be taken, such as using coolant or intermittent - grinding to allow the workpiece to dissipate heat. Meanwhile, promptly clean the debris and dust generated during grinding to prevent them from accumulating on the grinding surface or entering the grinding product, which could affect the grinding effect and service life.

Safety Protection: When using flap discs and flap wheels, be sure to wear the corresponding safety - protection equipment, such as safety - goggles, dust - masks, and gloves, to prevent debris and dust from harming the eyes, respiratory - tract, and hands. Also, ensure that there are no irrelevant personnel around the work - area to prevent accidents.

Inspection and Replacement: 

Before and during use, regularly check the wear condition of the flap disc and flap wheel. If significant wear is found, such as the blades becoming thinner or the abrasive falling off, replace the product with a new one in a timely manner to ensure the grinding effect and safety. In addition, if abnormal vibration, noise, or other issues occur during use, stop using it immediately, check the cause, and take corresponding measures, such as reinstalling, replacing the product, or checking the power tool.